DCET Inserts Manufacturer & Supplier in China
CarbideMatch manufactures standard and custom DCET turning inserts for small-part finishing, profiling and low-force precision turning. Send your holder, sample, drawing and cutting conditions for technical review.
What Is a DCET Insert?
A DCET insert is an ISO 55° rhombic, 7°-clearance, E class turning insert. It uses a positive, high-precision, single-sided insert with a fixing hole and integral chip-forming geometry; handed suffixes may apply and is commonly considered for small-part finishing, profiling and low-force precision turning. Final suitability depends on the complete designation, holder pocket, grade and edge preparation.
Key Specifications
Insert Shape
55° rhombic
Clearance Angle
7°
Tolerance Class
E class
Insert Configuration
Positive, high-precision, single-sided insert with a fixing hole and integral chip-forming geometry; handed suffixes may apply
Common ISO Sizes
DCET 0702, 11T3
Primary Applications
Small-part finishing, profiling and low-force precision turning
Custom DCET Insert Options
Configure the key manufacturing details for your insert application, from dimensions and cutting material to edge condition and identification.
Dimensions & Tolerances
Specify insert dimensions and tolerances according to your drawings.
Cutting Material & Grade
Select insert material and grade to suit your machining application.
Top Geometry & Chip Control
Customize top geometry and chip control features for your cutting needs.
Edge Preparation
Specify edge honing, chamfers and other edge preparation options.
Coating & Surface Treatment
Choose coating and surface treatments to meet your cutting needs.
Marking & Packaging
Customize insert markings and packaging to meet your order requirements.
Available DCET Insert Sizes
CarbideMatch manufactures DCET inserts in the standard sizes listed below and can review custom dimensions, edge preparation, grade and coating direction, marking, packaging, or application-specific requirements. Send your ISO designation, drawing, dimensions, physical sample, work material, or cutting conditions for technical review and a quotation.
ISO Designation
IC (mm)
S (mm)
RE (mm)
D1 (mm)
DCET 070201
6.35
2.38
0.1
2.8
DCET 070202
6.35
2.38
0.2
2.8
DCET 070204
6.35
2.38
0.4
2.8
DCET 11T301
9.525
3.97
0.1
4.4
DCET 11T302
9.525
3.97
0.2
4.4
DCET 11T304
9.525
3.97
0.4
4.4
Don't See the Configuration You Need?
The configurations shown above represent commonly requested options and may not include everything we can supply. Contact us to check another specification or discuss your custom requirements.
DCET Insert Applications
DCET inserts can support the following operations when the holder, grade, edge preparation and cutting data are properly matched.
External Turning
DCET can be considered for external turning when the holder pocket, grade and edge preparation match the operation.
Facing
Facing is feasible with suitable holder approach, workholding, machine power and chip evacuation.
Profiling
The 55° rhombic geometry supports profile access within the holder and collision limits.
Application-Specific Finishing or Roughing
The family is commonly selected for small-part finishing, profiling and low-force precision turning, subject to work material, feed, depth of cut and setup stability.
Custom and Replacement Programs
CarbideMatch can review samples, drawings and application data for standard replacement, private-label and technically feasible custom production.
DCET Insert FAQ
Which suffixes must be retained when ordering DCET?
Retain all hand, chip-former, edge-preparation and grade suffixes from the approved sample or drawing. The four-letter family and size alone may not define the cutting edge.
What holder checks prevent a DCET mismatch?
Confirm pocket size, seat, screw or clamp, hand, approach angle, shim, overhang and clearance around the workpiece before approving an interchange.
How should a trial quantity of DCET be evaluated?
Keep stock, holder, toolpath, coolant and cutting data controlled, then compare tool life, wear location, chips, finish, dimensional drift and breakage with the current insert.
What inspection data can accompany custom DCET production?
Drawing-defined dimensions, sampling level, dimensional report, material or coating documentation and traceability marking can be reviewed before quotation.
When should a physical DCET sample be supplied?
Supply a sample when markings are incomplete, the chip-former is proprietary, hand is unclear, the pocket is modified or the replacement must reproduce a non-standard feature.
What commercial details are needed for a DCET project?
State trial quantity, annual usage, packaging, private marking, destination, target delivery window and whether the request is a repeat replacement or a new application.
About CarbideMatch
CarbideMatch is a cutting-tool manufacturer and multi-brand distributor with years of OEM manufacturing and industry experience. We currently focus on carbide and indexable inserts across a wide range of brands, grades and specifications.
Search by part number, ISO/ANSI code, grade or application to quickly identify suitable inserts and compatible alternatives
- Own Manufacturing Capabilities
- Multi-Brand Product Supply
- Application-Based Grade Matching
How We Work
Search by part number, ISO/ANSI code, grade or application — or send us your requirements and let us help match the right insert.
01
Submit Requirements
Share the part number, drawing, material or cutting conditions.
02
Review Application
We verify specifications, operation and performance goals.
03
Match the Solution
We match the right inserts to your materials, cutting conditions and requirements.
04
Quote & Sample
Confirm pricing, availability and samples when required.
05
Inspect & Deliver
Products are checked, securely packed and shipped on schedule.
06
Ongoing Support
We support trial feedback, repeat orders and optimization.